9193永利链接-首頁(欢迎您)

服务热线电话

400-6188-756

红外温度传感器超声波清洗机在哪使用?

来源:/ 时间: 2022-11-25 浏览次数: 2

储液箱:
Reservoir:
1、容积尺寸:L420×W310×H400mm,配置封闭盖,外贴保温棉,SUS304材料制作。
1. Volume size: L420 × W310 × H400mm, equipped with closed cover, externally pasted with thermal insulation cotton, made of SUS304 material.
2、箱内设置不锈钢液位控制,无液自动关闭循环泵并声光报警。
2. Stainless steel liquid level control is set in the tank, and the circulating pump will be automatically shut down and give an audible and visual alarm when there is no liquid.
3、设进水口,外接水源。
3. The water inlet is set and connected to the water source.
4、储液箱底部向排液方向倾斜,排水口径为1"。
4. The bottom of the liquid storage tank is inclined towards the drainage direction, and the drainage diameter is 1 ".
5、储液箱设有缸盖系统,盖板采用嵌入式结构,以防洗剂泡沫溢出。
5. The fluid storage tank is equipped with a cylinder head system, and the cover plate adopts an embedded structure to prevent the overflow of detergent foam.
加热:内置不锈钢加热管家热,加热功率4KW。
Heating: built-in stainless steel heating pipe, heating power 4KW.
多槽手动超声波清洗机
温控器:数显式温度自动控制系统,测、控清洗槽内温度。工作温度可调。
Temperature controller: digital display temperature automatic control system, measuring and controlling the temperature in the cleaning tank. The working temperature is adjustable.
超纯水高频漂洗槽:
Ultra pure water high-frequency rinsing tank:
1、结构为锯齿形三面溢流,第13、12槽设进纯水口,与纯水预热箱及纯水源并联相接。溢水槽宽35mm。通过溢流可以源源不断进入新鲜液体,保持槽内液体有较高的清洁度,进水前加设3道PP过滤系统,过滤精度根据生产需要设定。
1. The structure is zigzag three side overflow. The 13th and 12th grooves are equipped with pure water inlet, which is connected in parallel with pure water preheating tank and pure water source. The overflow channel is 35mm wide. Fresh liquid can enter the tank continuously through overflow to keep the liquid in the tank clean. Three PP filtering systems are added before the water enters the tank. The filtering accuracy is set according to the production needs.
2、槽体设排液口,可通过手动球阀将液体直接排掉。
2. The tank body is provided with a drain port, which can drain the liquid directly through a manual ball valve.
3、每一清洗槽外贴2KW铸铝加热板。
3. Each cleaning tank is pasted with a 2KW cast aluminum heating plate.
4、清洗槽外贴保温棉。
4. The cleaning tank is pasted with thermal insulation cotton.
四、抛动机构:
4、 Throwing mechanism:
形式:
Form:
1、平面连杆机构驱动,带动清洗篮在清洗槽内作上下运动。运行稳定性好,噪声小。
1. The planar linkage mechanism drives the cleaning basket to move up and down in the cleaning tank. Good operation stability and low noise.
2、抛动托架为不锈钢材质,抛动架根部要加强,防止断裂。
2. The throwing bracket is made of stainless steel, and the root of the throwing bracket shall be strengthened to prevent fracture.

相关文章

联系我们

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:济南市先行区太平街道机械装备产业园创业路二号

关注科尔

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:鲁ICP备18049717号-1 技术支持:网站建设·推广运营