9193永利链接-首頁(欢迎您)

服务热线电话

400-6188-756

超声波清洗器开始运作前的预处理

来源:/ 时间: 2022-06-14 浏览次数: 2

超声波清洗器可以进行清洗,但其处理泥污的能力较弱,因此在预处理时应尽可能去除黄泥或泥污。
The ultrasonic cleaner can be used for cleaning, but its ability to treat mud is weak. Therefore, yellow mud or mud should be removed as much as possible during pretreatment.
超声波清洗器清洗前,建议用竹刀简单地清洗零件表面的污垢(如防尘罩外表面有大量灰尘,气缸体等零件的壳体曲线上有大量厚厚的易清除的油泥堆积),以延长清洗液的使用寿命。
Before cleaning the ultrasonic cleaner, it is recommended to simply clean the dirt on the surface of the parts with a bamboo knife (for example, there is a lot of dust on the outer surface of the dust cover, and there are a lot of thick oil sludge accumulation on the shell curve of parts such as cylinder block, etc.) to prolong the service life of the cleaning fluid.
1.手动清洁方法是手工完成的?使用金属刷、刮刀和其他工具清除零件和部件表面的污垢。这种方法还包括用棉、丝、合成纤维、麂皮擦拭零部件表面?去污垢。
1. is manual cleaning done manually? Use metal brushes, scrapers, and other tools to remove dirt from parts and component surfaces. This method also includes wiping the surface of parts with cotton, silk, synthetic fiber and suede? Remove dirt.
2.机械工具清洁方法使用电动或气动工具驱动金属刷、软砂轮等。去除零件和部件表面的积碳、铁锈和油漆层。
2. cleaning method of mechanical tools use electric or pneumatic tools to drive metal brushes, soft grinding wheels, etc. Remove carbon deposit, rust and paint layer on the surface of parts and components.
3.压缩空气吹扫法使用压缩空气吹扫干燥的灰尘、污泥等。覆盖零件和部件的表面。
3. compressed air purging method uses compressed air to purge dry dust, sludge, etc. Covers the surfaces of parts and assemblies.
以上就是为大家介绍的全自动超声波清洗机有关的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以专业的态度,为您提供服务.
The above is the full-automatic ultrasonic cleaning machine introduced to you I hope that the detailed introduction to the will be helpful to you If you have any questions, please contact us We will provide you with professional service

联系我们

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:济南市先行区太平街道机械装备产业园创业路二号

关注科尔

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:鲁ICP备18049717号-1 技术支持:网站建设·推广运营