9193永利链接-首頁(欢迎您)

服务热线电话

400-6188-756

多槽超声波清洗机的使用要注意什么?

来源:/ 时间: 2022-04-25 浏览次数: 2

超声波清洗机是当下清洗行业不可缺少的产品。它的出现解决了清洗问题,提高了清洗行业的清洗效率,解决了人工清洗费时费力的问题。在许多领域,多槽超声波清洗机可以用来清洗物品,因为清洗后的物品比手动清洗干净。然而,为了获得更好的清洗质量,除了按照要求操作各种程序外,我们还需要了解使用多槽超声波清洗机的注意事项.
Ultrasonic cleaning machine is an indispensable product in the current cleaning industry. Its appearance solves the cleaning problem, improves the cleaning efficiency of the cleaning industry, and solves the problem of time-consuming and laborious manual cleaning. In many fields, multi tank ultrasonic cleaning machine can be used to clean articles, because the cleaned articles are cleaner than manual cleaning. However, in order to obtain better cleaning quality, in addition to operating various procedures as required, we also need to understand the precautions for using multi slot ultrasonic cleaning machine
一、清洗篮
1、 Cleaning basket
在使用多槽式超声波清洗机清洗一些较小的零件物品时经常需要使用清洗筐,但是清洗筐上的网眼会引起超声衰减,所以要特别引起注意,注意选择网眼大小合适的清洗篮,此外建议选用不锈钢材质的清洗篮,尽量不要使用塑胶框,这样能够防止静电的产生。
When using the multi slot ultrasonic cleaning machine to clean some small parts and articles, it is often necessary to use the cleaning basket, but the mesh on the cleaning basket will cause ultrasonic attenuation, so special attention should be paid to selecting the cleaning basket with appropriate mesh size. In addition, it is recommended to select the cleaning basket made of stainless steel and try not to use plastic frame, so as to prevent the generation of static electricity.
超声波清洗机价格
二、清洗时间
2、 Cleaning time
通常在清洗时每道工序的时间定为三至五分钟,如果被清洗物品的表面积比较大,或者工件的结构较为复杂时,要注意根据实际情况酌情调整多槽式超声波清洗机的清洗时间。若被清洗物容易出现重叠以及粘附的现象,那么在将被清洗物放入及取出槽液的时候可以抖动一下工件,让清洗剂充分与工件接触以提高清洗效果。
Usually, the time of each process is set at three to five minutes during cleaning. If the surface area of the cleaned object is relatively large or the structure of the workpiece is complex, pay attention to adjust the cleaning time of the multi slot ultrasonic cleaning machine according to the actual situation. If the cleaned objects are prone to overlap and adhesion, shake the workpiece when putting and taking out the cleaned objects into and out of the tank liquid, so that the cleaning agent can fully contact the workpiece to improve the cleaning effect.
三、加液和串槽
3、 Liquid filling and cascade tank
用多槽式超声波清洗机清洗工件要注意槽液不能加得太满,以免发生两槽超声波清洗剂之间相互混合以及沥干时清洗筐底部黏液的现象。此外,多槽式超声波清洗机的每个槽应为独立的操作工序,注意不要将两槽清洗剂相互串用或人为减少操作工序以及清洗的操作时间。
When cleaning the workpiece with multi tank ultrasonic cleaning machine, pay attention to that the tank liquid cannot be filled too full, so as to avoid the phenomenon of mixing between the two tanks of ultrasonic cleaning agents and cleaning the mucus at the bottom of the basket when draining. In addition, each tank of the multi tank ultrasonic cleaning machine shall be an independent operation process. Pay attention not to use the two tank cleaning agents in series with each other or artificially reduce the operation process and cleaning operation time.
以上就是今天小编带给大家的精彩内容,更多精彩内容请点击我们的网站:超声波清洗机价格
The above is the wonderful content that Xiaobian brings to you today. For more wonderful content, please click our website: price of ultrasonic cleaning machine

联系我们

詹老师:18663767799(微信同号)

陶老师:13011716033(微信同号)

张老师:18663767790(微信同号)

:1476171179/1500705758

:jnkergs@163.com

:地址:济南市先行区太平街道机械装备产业园创业路二号

关注科尔

  • 扫一扫了解更多

  • 扫一扫了解更多

备案号:鲁ICP备18049717号-1 技术支持:网站建设·推广运营